An optional measuring adapter is available to ease the perfor-
mance of some measurements. This adapter facilitates the
connection of transistors (also SMD types) and standard
K-type thermal sensors with miniature plugs. Attach the
adapter to the three measuring sockets COM (5) + V (8) + mA
(7).
A Transistor test header for NPN types
B Plugin header for K-type sensors (observe the polarity!)
C Transistor test header for PNP types
To ensure the accuracy of the multimeter over an extended period of time, it should be calibrated once a year.
Apart from occasional cleaning and fuse replacements, the multimeter requires no servicing.
Information on changing the battery and fuse appears below.
Always observe the following safety instructions before cleaning the device:
Do not use any carbon-containing cleaning agents or petrol, alcohol or the like to clean the product. These could
corrode the surface of the measuring instrument. Furthermore, the fumes are hazardous to your health and explo-
sive. Moreover, you should not use sharp-edged tools, screwdrivers or metal brushes or similar for cleaning.
For cleaning the device or the display and the measuring lines, use a clean, fuzz-free, antistatic slightly damp cloth.
To Next Page
Loading...
Need help?
General
