Alternating voltage (40 – 400 Hz), overload protection 250 V, Average recording for sinus signal.
(5 – 100% of the measuring
range)
(5 – 100% of the measuring
range)
200 V
±(1,5% + 8)
0.1 V 400 mV* ±(2,0% + 10) 0.1 mV
250 V 1 V 4,000 mV
±(1,6% + 4)
1 mV
40 V 0.01 V
250 V 0.1 V
* With the VC170-1, the 400 mV measuring range
is only available via the manual measuring range
selection.
Direct current, overload protection 1A/250V + 10 A/250 V
200 µA*
±(1,3% + 2)
0.1 µA 400 µA
±(1,3% + 2)
0.1 µA
2000 µA 1 µA 4,000 µA 1 µA
20 mA 0.01 mA 40 mA
±(1,6% + 2)
0.01 mA
200 mA ±(1,5% + 8) 0.1 mA 400 mA 0.1 mA
10 A ±(2,5% + 10) 0.01 A 4 A
±(2,0% + 10)
0.01 A
* only with the VC130-1 10 A 0.1 A
Alternating current (only with VC170-1), overload protection 1A/250V + 10 A/250 V, Average recording for sinus
signal.
400 µA
±(1.6% + 5)
0,1 µA
4,000 µA 1 µA
40 mA
±(2.0% + 8)
0.01 mA
400 mA 0.1 mA
4 A
±(2.6% + 4)
0.001 A
10 A 0.01 A
To Next Page
Loading...
Need help?
General
