Text strings
Numbers between the symbols "<<" and ">>"
symbolize a text string. For information on what the
numerical text means, see section "Menus" or
"Numerical translation table".
Stop message
Red stop lamp + stop symbol
If the red stop lamp and the stop symbol are displayed
the vehicle should be stopped immediately and the
engine switched off. The associated numerical text
should be read in order to establish where the fault
lies. For information on what the numerical text
means, see section "Menus" or "Numerical translation
table".
J3014364
J3013624
A warning will sound if the engine is running. It can
be acknowledged by pressing Esc, but it starts again
after 10 seconds. For more information about the
message, see "Driver instructions Display, graphical".
Warning!
When this lamp lights, the vehicle
must be stopped immediately and
the engine switched off.
The information lamp CHECK + text
When the information lamp CHECK lights up, the
fault should be checked at the next stop. The
associated numerical text is shown in the display. A
result of measurement is also shown for some
symbols. For information on what the numerical text
means, see section "Menus" or "Numerical translation
table".
J3014365
Information display
103
To Next Page
