Constant engine speed control
The engine can be held at another speed than idle, for
example when the power take-off is in use. The truck
must be stationary. (To change the idle speed
temporarily, see section "Constant engine speed
control")
Note!
Never set the engine speed higher
than the body builder's
recommendation. See information
from the body builder.
Choice of engine speed
1 Push B to ON
2 Change the engine speed with SET (A)
Preset engine speed
Push B to RESUME.
The preset engine speed is normally
1000 rpm
.
Disengage engine speed control
There are four different ways of disengaging the
engine speed control. Do one of the following:
• Push B to OFF
• Depress the clutch pedal
• Depress the brake pedal
• Use the trailer brake
J0008305
Lane Keeping Support
Lane Keeping Support
is a driving support system
aimed at warning the driver for unintentional deviation
from the intended direction. The main area of use for
the system is on motorways when the truck has a
speed above
60 km/h
and in monotonous driving
conditions.
170
Driving
To Next Page
Loading...
