Volvo FH - Changing Wiper Blades

1 Clutch fluid level
Check that the fluid level is between the min and max
marks. Top up with fluid as necessary. Dirty or
incorrect fluid may cause serious faults.
Fill up with the correct clutch fluid: Brake fluid as per
standard DOT 4 (SAE J 1703)
J0008165
Note!
Fill the fluid carefully. Tighten the
reservoir cap well. Any fluid that
runs out can damage the paintwork.
2 Tyre pressure (at least every fortnight)
For tyre pressures, refer to “Recommended tyre
pressures”
Changing wiper blades
1 Lift the wipers off the windscreen.
2 Press in the plastic catch (1).
3 Push the wipers away from the wiper arm (2).
Push down the washer nozzle if it is in the
way.
J0008264
Maintenance
509