Volvo FH - Starting the System

9 Press "Select" to send the message.
Starting the system
1 Turn the starter key. The system will start
automatically when the key is in the radio
position. The colour screen rises.
2 The system will automatically identify the driver
by reading the driver card in the digital
tachograph.
3 After the greeting you can begin to work with the
system.
1 Turn the starter key. The system will start
automatically when the key is in the radio
position.
2 The system will automatically identify the driver
by reading the driver card in the digital
tachograph.
3 After the greeting you can begin to work with the
system.
1 Turn the starter key. The system will start
automatically when the key is in the radio
position. The colour screen rises.
2 If the truck has an analogue tachograph, the
driver is identified by logging in on the
Dynafleet Driver Tool
unit with information from
the office.
3 After the greeting you can begin to work with the
system.
1 Turn the starter key. The system will start
automatically when the key is in the radio
position.
2 If the truck has an analogue tachograph, the
driver is identified by logging in on the
Dynafleet Driver Tool
unit with information from
the office.
Dynafleet
455