HEAT
3 Set the climate control:
• No recirculation
• Fan in position 0 or 1
• Air distribution to panel vents and floor
• Temperature at MAX
J8011834
Note!
With cold temperatures, the fan knob
may need to be set to position 2 or 3.
4 Hold the switch in until the LED in the switch lights.
The heater starts and continues to run for 10 hours or
until it is manually switched off.
J8008457
MCC & HEAT
5 Set the temperature with the thermostat. The green
indicator lamp lights up when the heater is switched on
and the cab fan is running (warming-up phase).
J8008250
Cab
335
To Next Page
