• With a question, pressing “Select” indicates a
Yes answer to the question.
• In forms where you can choose between
different values, pressing “Select” means that you
confirm and accept the current setting.
• In a menu, pressing “Select” moves you to the
active option, i.e. the highlighted submenu with
white text on a black background.
3 IR receiver, receives signals from the keypad.
4 “Arrow keys, right, left, up and down”, moves
the cursor in the selected direction.
5
IR transmitter, transmits signals to the Dynafleet
unit.
Keyboard
Use the keyboard to type messages. Do no expose the
keyboard to sunlight, damp, moisture or dirt.
The IR transmitter on the keyboard must be directed
towards the IR receiver on the
Dynafleet
unit when
you type.
To switch between
QWERTY
and Cyrillic on the
keyboard, press
ALT
and
SHIFT
at the same time, or
CTRL
and
SHIFT
at the same time.
Note!
The keypad can only be used while
the truck is stationary. Store the
keypad in the glove compartment in
the radio shelf while travelling. The
keypad is then protected against the
sun and will not move when braking
suddenly or in a collision.
Four-way directional cross
The standard functions in
Dynafleet
can be performed
using the joystick which is located on the dashboard,
near the steering wheel.
Care of the plastic casing and IR transmitter/
receiver
Clean with ordinary cleaning agents for vehicle
interiors. Try first on a small area that is not visible so
that the surface is not damaged.
Check that the lenses on the IR transmitter and the IR
receiver are clean, if the system does not react to
keyboard messages. The lenses should be cleaned with
a soft, clean and slightly damp cloth.
Dynafleet
451
To Next Page
Loading...
