J1007655
J1007661
Oil change
1 Clean around the drain plug (C) and the filler
plug (B).
2 Unscrew the drain plug (C) and drain the oil.
Unscrew the filler plug (B).
3 Fit the drain plug (C). If the sealing ring on the
plug is damaged, it must be replaced.
4 Fill new oil into the transfer gearbox until the oil
level reaches the centre of the transparent level
plug (A) (maximum and minimum oil level, see
illustration).
5 Refit the filler plug (B). If the sealing ring on the
plug is damaged, it must be replaced.
J1007656
Maintenance
565
To Next Page
