Tuning the Radio 29
If TP is turned ON and the radio is not
tuned to a station broadcasting traffic
announcements, it will begin to SEEK a
station that broadcasts announcements. The
radio will display “SEARCH”.
During a Traffic Announcement, the radio
display is “TRAFFIC”.
There are 3 TP icons that may be displayed:
TP Current station can broadcast traffic
announcements, the function is not enabled.
[ TP ] Flashing Current station can
broadcast traffic announcements, the
function is enabled.
[]—The function is enabled, but there are
no stations/networks being received that
broadcast traffic information. This can also
occur if the TP function is enabled but the
radio travels out of the broadcast area for the
station/network that was broadcasting the
traffic information.
Traffic Announcement Volume
The volume of all traffic announcements
can be reduced or increased by adjusting
the volume while an announcement is being
heard. When the next announcement is
received, the volume will automatically
increase to this volume. When the
announcement is over, the radio will return
to the previous volume setting of whatever
radio mode was playing.
The Traffic Announcement volume setting
will be saved for all future announcements
until it is adjusted again.
To Next Page
Loading...
