Getting started16 17
2 GETTING STARTED
In this chapter, you will learn how to set up your
Kobold VB100 Cordless Vacuum Cleaner. You will
get to know the basic functions of your cordless
vacuum cleaner and how to use it properly.
Your cordless vacuum cleaner is supplied with the
battery and premium filter bag already inserted.
Before you can start, you must attach the Kobold
EBB100 Electric Brush (see chapter “2.1 Attaching or
chaning the accessory head” on page 16) and fully
charge the battery
(see chapter “2.3 Charing the
Kobold VB100 Cordless Vacuum Cleaner” on
page 19).
When you first receive your cordless vacuum
cleaner, the transport mode is activated. You will
need to charge your device before you can switch
it on for the first time (chapter “2.3 Charging the
Kobold VB100 Cordless Vacuum Cleaner” on
page19).
2.1 ATTACHING OR CHANGING
THE ACCESSORY HEAD
For cleaning floors, you use the Kobold VB100
Cordless Vacuum Cleaner in combination with the
Kobold EBB100 Electric Brush.
1. Connect the attachment socket of the cordless
vacuum cleaner to the pivot on the electric brush
.
2. Make sure you hear the attachment socket click
into the pivot.
3. To remove the electric brush from the cordless
vacuum cleaner, press the button
located at
the bottom of the suction piece.
Once it is unlocked, you can remove the electric
brush from the cordless vacuum cleaner.
To Next Page
Loading...
Need help?
General
