Getting started17
2.2 STANDBY POSITION AND
POWER SETTING
2.2.1 SETTING THE DEVICE INTO STANDBY
POSITION
CAUTION
Risk of injury and falling!
The standby position is used to park the device
after you have finished working with it or when
you take a break.
•
Always place the Kobold VB100 Cordless Vacuum
Cleaner and the accessory head on a level sur-
face when in the standby position.
• Never use the Kobold VB100 Cordless Vacuum
Cleaner to support yourself.
• Never stand on the accessory heads.
NOTICE
Risk of damage when the device starts up
automatically!
• Please note that the Kobold EBB100 Electric
Brush starts up automatically when you take the
cordless vacuum cleaner out of standby position
if you have not switched the cordless vacuum
cleaner off at the main switch first.
The standby position is used for storing your cord-
less vacuum cleaner, when you are not using it or
want to charge it. You can also ‘park’ it in this posi-
tion if you want to take a short break while cleaning.
In the standby position, the device stands upright
and firmly on the floor.
To Next Page
Loading...
Need help?
General
