Maintenance43
6 TROUBLESHOOTING
WARNING
Risk of electric shock and injury!
• In the event of damage, contact the Vorwerk Customer Service Centre.
• Never perform repairs on your device yourself. Repairs to electric appliances may only be
carried out by your authorised Vorwerk Customer Service Centre.
• Stop using the AC charger if it is damaged.
• Always switch the device off before all retrofitting, cleaning and maintenance work.
• Disconnect the accessory head from the cordless vacuum cleaner before performing ret-
rofitting, cleaning or maintenance work on the accessory head.
If your device does not function properly, it could be due to one of the following reasons:
6.1 KOBOLD VB100 CORDLESS VACUUM CLEANER
Fault Possible cause and solutions
The cordless vacuum cleaner cannot
be switched on.
Your cordless vacuum cleaner may still be in transport
mode (condition on delivery).
• Charge the cordless vacuum cleaner.
The battery pack may be empty.
• Charge the cordless vacuum cleaner.
The cordless vacuum cleaner may not have been
charged correctly.
• Charge the cordless vacuum cleaner (if the charger
is correctly connected, the indicator will pulsate to
show that the cordless vacuum cleaner is charging).
The battery pack may not be inserted or may not be
inserted correctly.
• Insert the battery pack as described in chapter
“5.2.3 Replacing the battery pack on the Kobold
VB100 Cordless Vacuum Cleaner” on page38.
The charger may still be connected.
• Disconnect the cordless vacuum cleaner from the
charger. The cordless vacuum cleaner will not start
up if the charger is connected.
To Next Page
