Operation22 23
3 OPERATION
3.1 SWITCHING THE KOBOLD
VB100 CORDLESS VACUUM
CLEANER ON AND OFF
1.
Switch on the Kobold VB100 Cordless Vacuum
Cleaner
by pressing the main switch .
2. To switch if off, press the main switch again.
3.2 SETTING THE SUCTION
POWER LEVEL
The suction power level can be manually set using
the silver switch
as follows:
LED display on
handle
Suction power level
One white LED is
lit on the handle.
soft, minimum suction
power
Two white LEDs
are lit on the
handle.
med, medium suction
power
Three white LEDs
are lit on the
handle.
max, maximum suction
power
Every time you switch on your cordless vac-
uum cleaner, it will automatically start operating
on the ‘med’ suction power setting, with the elec-
tric brush in normal mode (see chapter “3.3
Cleaning with the Kobold EBB100 Electric Brush”
on page23).
4
5
3
2
To Next Page
Loading...
Need help?
General
