Getting started20 21
2.3.2 CHARGING
To charge your cordless vacuum cleaner, proceed as
follows:
1. Put the cordless vacuum cleaner into the standby
position (see chapter “2.2 Standby position and
power setting” on page 17).
2. Connect the AC charger
to the power supply.
3. Note the prescribed voltage of 220-240 V.
4. Connect the AC charger to the charging point on
the cordless vacuum cleaner
.
5. Ensure that the plug is fully inserted.
You can also charge the battery pack sepa-
rately. For more information on this, see chapter
“Charging the removed battery pack” on
page39.
2.3.3 LED DISPLAY INDICATING CHARGING
STAT US
LED dis-
play
Battery level
LEDs
rise.
Battery pack is charging.
The battery is currently charging
and is not completely charged
at the present time.
The charging period may take
up to three hours.
All LEDs
have
gone out.
The battery pack is fully
charged.
The battery pack is charged
and the cordless vacuum cleaner
is fully ready for operation.
To Next Page
Loading...
Need help?
General
