Vorwerk KOBOLD VB100 - Accessory Head Suitability for Floors; Floor Type Compatibility Guide

SUITABILITY OF THE ACCESSORY HEADS FOR FLOORS
Carpet type Kobold EBB100
Loop-pile carpet
Velour carpet
++
Berber carpet
Deep-pile carpeting,
Light rugs
Silk carpets
Sisal flooring
+
Fur
Flokati
Loosely woven carpets
Carpets with long interwoven fibres (Saxony)
–
Hard floor type
Sealed/varnished wooden floors
(floorboards, parquet)
++
Oiled/waxed wooden floors +
Unsealed/untreated wooden floors –
Sealed cork floors ++
Oiled/waxed cork floors +
Unsealed/untreated cork floors –
Laminate ++
Elastic floors
(PVC, cushion vinyl, linoleum)
+
Stone floors (marble, granite, Jura limestone, arti-
ficial stone)
+
Porous/delicate natural stone
(slate, clinker tiles)
–
Clay floors (terracotta, clinker, brick clay tiles) +
Ceramic glazed tiles and fine stoneware ++
Untreated tiled floors –
Rough concrete flooring (washed concrete) –
Use Kobold 2-in-1 nozzle
Skirting boards, corners and above floor ++
1
++ excellent suitability – not suitable
+ very good suitability
1
Not suitable for smooth or polished surfaces
Note!
Follow the detailed application instructions in the following
chapters.