VTI Instruments EX1200 Series - EX1200-6102: 17-Channel Coaxial Switches, 1.3 GHz

VTI Instruments Corp.
124 EX1200-6102 Plug-in Module
EX1200-6102 P
LUG
-
IN
M
ODULE
17-C
HANNEL
(1
X
2) C
OAXIAL
S
WITCHES
, 1.3GH
Z
The EX1200-6102 is a high-density RF switch module designed for high-fidelity RF switching
applications up to 1.3 GHz. Excellent crosstalk and isolation is maintained by using RF relays
with bandwidths in excess of 2.0 GHz, along with short, low-loss coaxial runs from connector
directly to relays. All modules are also configured to avoid any unterminated stub effects,
improving overall signal integrity, and allowing for high frequency matrix designs and larger
multiplexer configurations while maintaining bandwidth and VSWR.
The EX1200-6102 can be controlled programmatically using IviSwtch-compliant calls. Both path
level programming and individual relay control are available. Refer to the host driver
documentation for additional details.
382H
Figure 4- provides a logical diagram of the switch module
and identifies the switches used by the module. This information can be used for individual relay
control through the driver. Both single-wire and two-wire programming modes are available.
C
ONNECTOR
P
INS AND
S
IGNALS
F
IGURE
4-51: EX1200-6102 F
RONT
P
ANEL
(F
RONT
V
IEW
)