www.vtiinstruments.com
EX1200-7100 Plug-in Module 163
F
IGURE
4-84:
MULTIPLE
SMP4
M
ODULE IN
EX1268A
CHASSIS
D
IAGRAM
SMP
FIRMWARE
UPDATE
PROCEDURE
SMP card is a high density matrix switch card suitable for ex1200 platform. Though it is switch cards, the card firmware has
to be upgraded with new SMP image so that the carrier card will get detected in the ex12x7/ex12x8/ex12x9 or
ex12x7A/ex12x8A/ex12x9A chassis. This firmware image is exclusively built for 8442 plugin cards connected in the carrier.
The detection of carrier card required chassis firmware should be upgraded with the latest release image and then followed by
upgrading the SMP card image connected in the carrier of that chassis.
Note: The user has to use the existing switch cards images for all other switch cards. Kindly refer the below screenshot for
chassis & card upgrade image of EX1200 SMP.
To Next Page
Loading...