VTI Instruments EX1200 Series - Inserting IO Matrix Cards into SMP-4 Module

VTI Instruments Corp.
160 EX1200-7100 Plug-in Module
Inserting IO Matrix cards into SMP-4 Module
F
IGURE
4-79: IO M
ATRIX CARDS IN
SMP-4 D
IAGRAM
Procedure: Align/Insert each line card in the Chassis guide ways and push in to the chassis gently and make sure, face plate
of line card is in contact with front surface of chassis as shown above.
F
IGURE
4-79: EX1200-SMP4 C
ARRIER
C
ARD WITH
M
ATRIX CARDS
D
IAGRAM
Procedure: Use 8 number of screws to fix Top/Bottom handle assemblies to module as shown above to complete the full
assembly.