BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm 5-19
Operation 5
5. Position the boom as shown in Fig. 142.
6. Stop the engine, remove the starting key and carry it with you.
7. Raise the control lever base.
8. Wait one minute.
9. Put a piece of wood A against the attachment.
10.Wait one minute.
If the attachment does not move from the piece of wood:
➥ Machine is operational.
If the attachment moves away from the piece of wood:
➥ Stop operation immediately.
➥ Contact a Wacker Neuson service center and have the malfunction
rectified.
Fig. 142Positioning the boom
10 cm (4 in)
Fig. 143Identifying the deviation
A
To Next Page
Loading...
