BA EZ26 en/us* 1.0 * EZ26_01_400.fm 4-43
Putting into operation 4
Battery master switch
Possible damage to the electronics due to improper actuation of the
battery master switch.
► Do not operate the battery master switch with a running engine.
► Operate the battery master switch no sooner than two minutes after
shutting down the engine.
Actuate the battery isolator switch:
• If the vehicle is parked for longer periods of time (e.g. over the
weekend).
• If the vehicle is to be protected against unintentional taking into
service.
• If required by national and regional provisions.
The battery isolator switch is located under the valve hood.
Interrupt the electric power supply:
Flip up the battery isolator switchA and remove from theB positive
terminal.
Establish the electric power supply:
Set the battery isolator switchA to the positive terminalB and fold down.
Fig. 116 (symbolic representation)
A
A B
To Next Page
Loading...
