BA EZ26 en/us* 1.0 * EZ26_01_700.fm 7-27
Maintenance 7
Fuel filter
The fuel prefilter P and fuel main filter M are located under the engine
cover.
Both are equipped with a water separator.
Empty the water separator (prefilter)
1. Stop and park the vehicle Stop the engine See “Preparing lubrication”.
2. Open the engine cover.
3. Prepare a suitable container for collecting the fuel/water mixture.
4. Connect a drain hose to connection C. Place the hose into a container
on the ground.
5. Turn ball-type cock D to the OFF mark.
➥ Fuel supply is interrupted.
6. Unscrew connection C.
7. Collect the fuel/water mixture in a suitable container.
➥ Wait until indicator ring A returns to the bottom of the water
separator.
8. Screw connection C back on again.
9. Turn ball-type cock D to the ON mark.
➥ Fuel supply is open.
10.Remove the hose.
11.Close and lock the engine cover.
To Next Page
Loading...
