BA EZ26 en/us* 1.0 * EZ26_01_500.fm 5-3
Operation 5
Automatic engine speed setting
The diesel engine shifts to idling speed if the hydraulics are not operated
for a few seconds.
If the hydraulic system is operated, the diesel engine runs at the engine
speed set with the manual throttle.
This automatic revs setting is switched on and off with the A switch.
5.3 Brake
Hydraulic brake
The vehicle will slow down when the drive levers or accelerator pedals are
released.
During downhill vehicle travel, the automatic hydraulic brake valves
prevent the vehicle from moving faster than the permissible travel speed.
Reduce the speed with the drive levers or accelerator pedals, and not with
the throttle.
Mechanical brake
The stabilizer blade is used as a parking brake. Press the stabilizer blade
against the ground.
To Next Page
Loading...
