BA EZ26 en/us* 1.0 * EZ26_01_700.fm 7-19
Maintenance 7
Opening the engine cover
1. Stop and park the vehicle Stop the engine
-See “Preparing lubrication”.
2. Turn the starting key in lock A anticlockwise.
3. Press lock A and open the engine hood.
The engine cover is supported by a gas strut.
Close the engine cover
1. Firmly press down the engine cover.
2. Turn the starting key in lock A clockwise.
Fuse boxes
– see chapter “9.8 Electrical system” on page 9-3
Maintenance flap
Behind the maintenance cover to the left on the chassis is the on-board
tool kit.
Unlocking:
Turn the starting key in lock A anticlockwise.
Locking:
Turn the starting key in lock A clockwise.
To Next Page
Loading...
