Wacker Neuson EZ26 - Troubleshooting; Diesel Engine Malfunctions; Malfunctions

BA EZ26 en/us* 1.0 * EZ26_01_800.fm 8-1
Troubleshooting 8
8 Troubleshooting
NOTICE
Contact a Wacker Neuson service center in case of
malfunctions or signs that are not listed in the following tables or
that persist after maintenance has been performed correctly.
8.1 Diesel engine malfunctions
8.2 Malfunctions
Malfunction/sign Possible cause Remedy See
Engine does not start or is not easy
to start
Empty fuel tank Refueling 7-25
Malfunctioning or empty bat-
tery
Contact a Wacker Neuson
service center
--
Malfunctioning fuse Check the fuse 9-4
Engine starts, but does not run
smoothly or faultless
Air in fuel system Bleeding the fuel system 7-29
Engine overheats
Engine oil level too low Adding engine oil 7-31
Dirty air filter
Contact a Wacker Neuson
service center
--
Dirty radiator fins Cleaning the radiator 7-34
Coolant level too low Adding coolant 7-33
Engine does not have enough output Dirty air filter
Contact a Wacker Neuson
service center
--
Insufficient or no engine oil pressure Engine oil level too low Adding engine oil 7-29
Black engine smoke Dirty air filter
Contact a Wacker Neuson
service center
--
Malfunction/sign Possible cause Remedy See
Machine does not stay on track,
machine pulls to the right or left
Wrong track tension Tighten tracks correctly 7-44
Foreign bodies stuck in track Remove foreign bodies --
Uneven wear of tracks Contact a service center --
Troubleshooting