Wacker Neuson EZ26 - Trailer Operation

5-60 BA EZ26 en/us* 1.0 * EZ26_01_510.fm
5 Operation
Raise the upper carriage:
1. Press and hold the switch 1.
2. Press control lever 2 to the right.
➥ The superstructure lifts.
3. If the required tilt angle is reached, return joystick 2 to the neutral
position and release switch 1.
Lower the upper carriage:
1. Press and hold the switch 1.
2. Press control lever 2 to the left.
➥ The superstructure lowers.
3. If the required tilt angle is reached, return joystick 2 to the neutral
position and release switch 1.
Shovel bucket operation
NOTICE
The stick can be damaged if it is hit by the bucket base.
► Do not tilt out the bucket completely if it is used as a shovel bucket.
Trailer operation
The vehicle is not certified for trailer operation!
Fig. 217 (symbolic representation)
1
2
Fig. 218 (symbolic representation)