Wacker Neuson EZ26 - Tie-Down Points

BA EZ26 en/us* 1.0 * EZ26_01_600.fm 6-3
Transportation 6
Tie-down points
1. – see chapter “ Transportation” on page 2-15
2. Secure the transport vehicle with chocks to prevent it from rolling.
3. Install access ramps at the smallest possible angle. Ensure that the
grade does not exceed 15° (27%).
4. Use access ramps and transport surfaces with an anti-skid surface
only.
5. Ensure that the loading area is clear and access to it is not obstructed,
for example by superstructures.
A
Fig. 220 (symbolic representation)
Position Quantity
A Stabilizer blade 2
B Front of travel gear 2
C Rear of travel gear 2
D Inside of travel gear 2
Fig. 221 (symbolic representation)
B
C
Fig. 222 (symbolic representation)
D
Fig. 223
< 15°