BA EZ26 en/us* 1.0 * EZ26_01_700.fm 7-3
Maintenance 7
Maintenance plan
Daily maintenance (operator)
Symbol
Inspection work
(Check the following fluids and lubricants, check the oil levels after a test
run and add oil if necessary)
Page
Check the fluids and lubricants (engine oil, engine coolant, hydraulic oil)
7-31; 7-33;
7-39
Check the radiator and hydraulic oil cooler for dirt, clean them if neces-
sary
7-34
Lubricate the vehicle according to the lubrication schedule 7-9
Check the dirt indicator on the air filter 7-35
Check the water separator and fuel filter on sight glass; drain water if nec-
essary
7-27
Check the track tension and retension the tracks if necessary 7-44
Check the engine air intake 7-35
Check the pin locks --
Check line fixtures --
Check the indicator lights and acoustic warning devices 4-28; 5-14
Check the swivel unit brake for correct function 5-19
Check the hydraulic couplings for dirt --
Check the threaded fittings of the protective structures (cabin, for exam-
ple) for tightness
--
Clean the lights/light system, signaling systems --
Safe load indicator: check the acoustic warning system 5-46
Hydraulic quickhitch (Easy Lock): check the acoustic warning system 5-28
To Next Page
Loading...
