Wacker Neuson EZ26 - Declaration of Conformity; EC Compliance Statement

BA EZ26 en/us* 1.0 * EZ26_01_konf.fm EG-1
Declaration of conformity
Declaration of conformity
The indications specified above correspond to the existing information at time of going to press. They have
possibly changed in the meantime (refer to the original declaration of conformity supplied with the vehicle).
Applies to EU countries, and countries with legislation similar to that of the EU. Applies to all vehicles with CE
marks that have not been modified without authorization since the product was placed on the market.
Manufacturer
Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria
Product
Declaration of conformity
Notified body according to Directive 2006/42/EC, appendix XI:
DGUV Test, test and certification body
construction department, Landsberger Str. 309, 80687 Munich, Germany
EU identification number 0515
Notified body involved in procedure
TÜV SÜD Industrie Service GmbH
Westendstr. 199
D-80686 Munich
Directives and standards
We hereby declare that this product corresponds to the relevant regulations of the following Directives
and standards:
2006/42/EC, 2005/88/EC, 2000/14/EC - Appendix VIII;
DIN EN ISO 12100-1, DIN EN ISO 12100-2, DIN EN 474-1 and DIN EN 474-3 (except for 5.4),
DIN 3471, EN ISO 3744, DIN EN ISO 3449
Authorized representative for the compilation of technical documentation
Annette Ortmayr, team leader Technical Documentation
Flughafenstr. 7
4063 Hörsching
Austria
Machine designation Hydraulic excavator
Machine model E10-03
Trade name EZ26
Serial number --
Engine / output kW 3TNV76-NNS/15.8
Measured sound power level dB (A) 93
Guaranteed sound power level dB (A) 93
Johannes Mahringer,
Managing director
EC Compliance Statement
Declaration of conformity