Wacker Neuson EZ26 - Temperature Setting; Traveling Signal (Option)

5-14 BA EZ26 en/us* 1.0 * EZ26_01_500.fm
5 Operation
5.8 Temperature setting
Fan
The switch is located on the switch panel on the right.
Temperature
The rotary control is located on the right in the footwell.
Traveling signal (option)
A travel signal sounds as soon as at least one of the tracks moves.
WARNING
Accident hazard during forward/backward vehicle operation!
Danger of crushing that may lead to serious injuries or death.
► Do not allow anyone to stay in the danger zone.
► Despite the traveling signal the danger zone must also be monitored
visually.
► If the travel signal does not sound, stop vehicle operation immediately
and contact a Wacker Neuson service center. Follow the relevant
national and regional regulations.
Fig. 132
A
0
1
2
Fan Operation
Off Press switch A into position 0
1st range Press switch A into position 1
2nd range Press switch A into position 2
Fig. 133:
Temperature Operation
Higher Turn rotary control counterclockwise
Lower Turn the rotary control clockwise