Wacker Neuson EZ26 - Adding Hydraulic Oil

7-40 BA EZ26 en/us* 1.0 * EZ26_01_710.fm
7 Maintenance
Adding hydraulic oil
CAUTION
Slipping/tripping hazard when adding hydraulic oil!
Can cause injury.
► Use a safety-oriented ladder to add hydraulic oil.
► Do not use vehicle parts or attachments as a climbing aid.
1. Open the engine cover.
2. Open the reservoir ventilation B to release the pressure inside the
hydraulic oil reservoir.
3. Slowly open cover C.
4. Add hydraulic oil up to the corresponding mark.
5. Check the hydraulic oil level on sight glass A.
6. Add if necessary and check again.
7. Screw on cover C and tank ventilation B.
8. Close and lock the engine cover.
Environment
Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
Fig. 256
B
Fig. 257
C
A