6-4 BA EZ26 en/us* 1.0 * EZ26_01_600.fm
6 Transportation
6. Start the engine.
7. Raise the boom and the stabilizer blade to avoid touching the access
ramps.
8. Carefully drive the vehicle onto the middle of the transport vehicle.
9. Move the vehicle to transport position:
- Position the boom straight ahead at the center of the vehicle.
- Lower the boom and the stabilizer blade.
10.Stop the engine
11.Raise the control lever base.
12.Remove the starting key and carry it with you.
13.Leave the cab, close and lock all doors, windows and covers.
14.Firmly secure the vehicle on the loading area with tie-down points with
sling gear of appropriate size. Observe the legal regulations.
To Next Page
Loading...
