7-6 BA EZ26 en/us* 1.0 * EZ26_01_700.fm
7 Maintenance
Other maintenance intervals (Wacker Neuson service center):
• Every 250 operating hours
• Every 500 operating hours or annually
• Every 1000 operating hours
• Every 1500 operating hours
For additional details contact a Wacker Neuson service center.
Maintenance with the note authorized service center must be performed
only by the trained and qualified personnel of an authorized service
center.
Only once after the first 50 operating hours (Wacker Neuson service center)
Change the engine oil --
Replacing the engine oil filter --
Replace the hydraulic oil filter --
Replace the gearbox oil (traveling drive) --
Check V-belt condition and tension --
Check the threaded fittings for tightness --
Check labels and Operator’s Manual for completeness and condition --
Reset the maintenance meter --
All steps for maintenance once a day and once a week --
To Next Page
Loading...
