4-30 BA EZ26 en/us* 1.0 * EZ26_01_400.fm
4 Putting into operation
Fuel tank capacity
Refuel if the segments reach the red range.
Hour meter
Counts the engine operating hours with the engine running.
Maintenance meter
Counts the remaining engine operating hours down to the next maintenance
work due.
If less than 10 hours are displayed, the wrench symbol flashes.
Overload
The symbol shown on the left appears and the buzzer sounds.
The permissible load diagram values are exceeded.
• Reduce the load until both the buzzer and the warning light go out –
see chapter “ Lifting gear applications” on page 5-44.
When the safe load indicator is switched on, the symbol is illuminated and the
buzzer sounds as a functional check.
Switch-over between the operating hour meter and the maintenance
counter
Symbol
To Next Page
Loading...
