wc_td000626gb_FM10.fm
120
Technical Data RT / RTx
11.2 Roller
11.3 Lubrication
1
Use synthetic oil to achieve 500 hour oil change interval for Kubota powered machine.
Machine RTx-SC3 RT82-SC3
Narrow Wide —
Operating weight (Kohler) kg (lb) 1,363 (3,005) 1,495 (3,295) 1,450 (3,197)
Operating weight (Kubota) kg (lb) 1,335 (2,945) 1,467 (3,235) 1,422 (3,134)
Area capacity m² (ft²) / hr 676 (7,276) 990 (10,654) 990 (10,654)
Inside turning radius m (in.) 1.73 (68) 1.6 (63) 1.6 (63)
Travel speed m (ft)/min 41.66 (132) high
21.66 (66) low
Vibration frequency Hz (vpm) 41.7 (2500)
Gradeability with vibration % 50
Gradeability w/o vibration % 45
Machine: RT82-SC3 / RTx-SC3
Engine crankcase (Kohler
powered machines only)
type
L (qt)
SAE 15W40 Class CF rated
or synthetic oil
2.5 (2.6)
Engine crankcase (Kubota
powered machines only)
type
L (qt)
SAE 15W40 Class CF rated
or synthetic oil
1
3.0 (3.2)
Hydraulic system type
L (gal)
Premium grade, anti-wear hydraulic fluid
SAE 10W30
40 (8)
Articulated joint type
qty
Mobil SHC 220 grease
as required
Steering cylinder type
qty
Mobil SHC 220 grease
as required
Radiator type
qty %
Water / Glycol
50 / 50
Exciter / drive bearings type Mobil SHC 220 grease
Drive gear / seals type Mobil SHC 220 grease
To Next Page
Loading...
