wc_tx003819gb_FM10.fm
93
RT / RTx General Maintenance
7.2 Hydraulic Oil Requirements
Wacker Neuson recommends the use of a good petroleum-based, anti-wear
hydraulic oil in the hydraulic system of this equipment. Good anti-wear hydraulic
oils contain special additives to reduce oxidation, prevent foaming, and provide for
good water separation.
When selecting hydraulic oil for your machine, be sure to specify anti-wear
properties. Most hydraulic oil suppliers will provide assistance in finding the correct
hydraulic oil for your machine.
Avoid mixing different brands and grades of hydraulic oils.
Most hydraulic oils are available in different viscosities.
The SAE number for an oil is used strictly to identify viscosity—it does not indicate
the type of oil (engine, hydraulic, gear, etc.).
When selecting a hydraulic oil be sure it matches the specified SAE viscosity rating
and is intended to be used as a hydraulic oil. See section Technical Data—
Lubrication.
To Next Page
Loading...
Need help?
General
