Wacker Neuson RTx-SC3 User Manual

wc_si000903gb_FM10.fm
30
Labels RT / RTx
G WARNING
Infrared signal: Always aim transmitter directly
at receiving eye on machine.
1. No travel when operator is within 2 meter
(6.6 ft.) of front or rear of machine. Machine
will operate when operator is within 2 meter
(6.6 ft.) of either side of machine.
2. Machine may receive and react to signals
reflected off objects.
Read the Operator’s Manual.
H To avoid blocking infrared transmissions and
possible machine malfunctions, do not attach
labels to housing!
Clean transmitter and receiving eyes before
using!
To avoid being pulled by the cable, use only
Wacker Neuson breakaway neck strap!
Clean transmitter and receiving eyes before
using!
Read the Operator’s Manual.
J Operator’s Manual must be stored on machine.
Replacement Operator’s Manual can be
ordered through your local Wacker Neuson
distributor.
INFRARED SIGNAL: ALWAYS AIM TRANSMITTER DIRECTLY AT INFRARED SIGNAL: ALWAYS AIM TRANSMITTER DIRECTLY AT
RECEIVING EYES ON MACHINE. RECEIVING EYES ON MACHINE.
1. NO FORWARD/REVERSE TRAVEL WITHIN 2 METERS (6.6 FEET).1. NO FORWARD/REVERSE TRAVEL WITHIN 2 METERS (6.6 FEET).
2. MACHINE MAY RECEIVE STRAY SIGNALS IF OPERATED NEAR 2. MACHINE MAY RECEIVE STRAY SIGNALS IF OPERATED NEAR
SOLID OBJECTS. SOLID OBJECTS.
SIGNAL A INFRAROUGE: TOUJOURS POINTER L'EMETTEURSIGNAL A INFRAROUGE: TOUJOURS POINTER L'EMETTEUR
DIRECTEMENT A LA CELLULE RECEPTRICE AU SOMMET DEDIRECTEMENT A LA CELLULE RECEPTRICE AU SOMMET DE
LA MACHINE.LA MACHINE.
1. MARCHE AVANT OU ARRIERE N'EST PAS POSSIBLE A1. MARCHE AVANT OU ARRIERE N'EST PAS POSSIBLE A
MOINS DE 2m. MOINS DE 2m.
2. C'EST POSSIBLE QUE LA MACHINE RECOIT LES SIGNAUX2. C'EST POSSIBLE QUE LA MACHINE RECOIT LES SIGNAUX
PERDUS SI UTILISEE DANS LE VOISINAGE DES OBJECTS PERDUS SI UTILISEE DANS LE VOISINAGE DES OBJECTS
SOLIDES. SOLIDES.
SEÑAL INFRARROJA: APUNTE SIEMPRE LA UNIDAD TRANSMISORASEÑAL INFRARROJA: APUNTE SIEMPRE LA UNIDAD TRANSMISORA
EN DIRECCION DEL OJO RECEPTOR UBICADO EN LA MAQUINA. EN DIRECCION DEL OJO RECEPTOR UBICADO EN LA MAQUINA.
1. NO HABRA MARCHA HACIA ADELANTE O HACIA ATRAS A1. NO HABRA MARCHA HACIA ADELANTE O HACIA ATRAS A
MENOS DE 2m. MENOS DE 2m.
2. LA MAQUINA PODRIA RECIBIR SEÑALES DISPERSAS AL SER 2. LA MAQUINA PODRIA RECIBIR SEÑALES DISPERSAS AL SER
OPERADA EN LAS CERCANIAS DE OBJETOS SOLIDOS. OPERADA EN LAS CERCANIAS DE OBJETOS SOLIDOS.
AVERTISSEMENTAVERTISSEMENT
ADVERTENCIAADVERTENCIA
52000222045200022204
2m2m
1
2m2m
2
WARNINGWARNING
52000222185200022218
2m2m
2
1
2m2m
www.wackerneuson.comwww.wackerneuson.com
180562
LA NOTICE D'EMPLOI DOIT ETRE MUNIE SUR LA MACHINE. LA NOTICE D'EMPLOI DOIT ETRE MUNIE SUR LA MACHINE.
CONTACTER LE DISTRIBUTEUR WACKER LE PLUS PROCHECONTACTER LE DISTRIBUTEUR WACKER LE PLUS PROCHE
POUR COMMANDER UN EXEMPLAIRE SUPPLEMENTAIRE.POUR COMMANDER UN EXEMPLAIRE SUPPLEMENTAIRE.
OPERATOR'S MANUAL MUST BE STORED ON MACHINE.OPERATOR'S MANUAL MUST BE STORED ON MACHINE.
REPLACEMENT OPERATOR'S MANUAL CAN BE ORDERED REPLACEMENT OPERATOR'S MANUAL CAN BE ORDERED
THROUGH YOUR LOCAL WACKER DISTRIBUTOR.THROUGH YOUR LOCAL WACKER DISTRIBUTOR.
EL MANUAL DE OPERACION DEBE SER RETENIDO EN LA EL MANUAL DE OPERACION DEBE SER RETENIDO EN LA
MAQUINA. CONTACTE A SU DISTRIBUIDOR WACKER MAS MAQUINA. CONTACTE A SU DISTRIBUIDOR WACKER MAS
CERCANO PARA PEDIR UN EJEMPLAR ADICIONAL.CERCANO PARA PEDIR UN EJEMPLAR ADICIONAL.
115096115096

Wacker Neuson RTx-SC3 Specifications

General

Brand	Wacker Neuson
Model	RTx-SC3
Category	Construction Equipment
Language	English