2004919_i•en•2017-09-01
We reserve the right to make technical changes
22
WMS WebControl
Below you can see an overview of the WMS WebControl screens on which
you can adjust the control modes.
In the "Operation" menu, the
and (①) buttons activate and deactivate
the control modes for all rooms with the channels created there that the
WMS WebControl knows.
If the control modes are changed here (e.g. set to
), this has an effect on
all control modes including the time switch.
If the control modes are set to here, only manual operation is possible.
Fig. 16 Control modes in the "Operation" menu
In the "Control modes" (①) menu item of the "Settings" menu, you can adjust
the values for the sun and dawn/dusk comfort control modes using
the slider for a certain channel in a certain room.
Dragging the slider to "Off" is equivalent to the value "0 klx". The control
mode is then switched off for this channel in this room.
Fig. 17 Control modes in the "Control modes" menu item in the "Settings" menu
Settings - control modes
To Next Page
Loading...
Need help?
General
