487 14 59 11 - TD30 TD50 TD75 US
Tumble dryer
NOTICE TO: OWNERS, OPERATORS AND DEALERS OF WASCOMAT MACHINES.
IMPROPER INSTALLATION AND INADEQUATE MAINTENANCE, POOR HOUSEKEEPING AND
WILLFUL NEGLECT OR BYPASSING OF SAFETY DEVICES MAY RESULT IN SERIOUS
ACCIDENTS OR INJURY. TO ASSURE THE SAFETY OF CUSTOMERS AND/OR OPERATORS
OF YOUR MACHINE, THE FOLLOWING MAINTENANCE CHECKS MUST BE PERFORMED ON
A DAILY BASIS.
1. Prior to operation of the machine, check to make certain that all operating instructions and
warning signs are affixed to the machine and legible. (See the following page of this manual
for description and location of the signs.) Missing or illegible signs and labels m
ust be
replaced immediatel
y.
Be sure you have spare signs and labels available at all times. These
can be obtained from your dealer or Wascomat.
2. Check the door safely switch, as follows:
(a) OPEN THE DOOR of the machine and attempt to start in the normal manner:
THE MACHINE(S) SHOULD NOT START!
(b) CLOSE THE DOOR to start machine operation and, while it is operating,
open the door: THE MACHINE(S) SHOULD STOP.
If the machine can operate with the door open, it must be placed out of order until the
necessary repairs are made.
3. DO NOT UNDER ANY CIRCUMSTANCES ATTEMPT TO BYPASS OR REWIRE ANY OF
THE MACHINE`S SAFETY DEVICES AS THIS CAN RESULT IN SERIOUS ACCIDENTS,
AND WILL VOID YOUR WARRANTY.
4. Be sure to keep the machine(s) in proper working order: Follow all maintenance and
safety procedures. Further information regarding machine safety, service and parts can be
obtained from your dealer or from Wascomat through its Customer Service Department .
All requests for assistance must include the model, serial number and electrical characteristics as
they appear on the machine identification plate.
5. WARNING: DO NOT OPERATE MACHINE(S) WITH SAFETY DEVICES BYPASSED,
REWIRED OR INOPERATIVE!
6. A wiring diagram for your machine is located behind the front panel as shown on page 2.
7
To Next Page
Loading...
