Wassp DRX - Default Chapter; Table of Contents

Page 4 of 102 Page 5 of 102Doc: DRX Installation
Version: 7.1 January 2021
Doc: DRX Installation
Version: 7.1 January 2021
wassp.com wassp.com
DRX INSTALLATION MANUAL DRX INSTALLATION MANUAL
CONTENTS
1 INTRODUCTION 9
1.1. Main Features 10
2 SYSTEM OVERVIEW 11
2.1. Complete System 12
2.2. Recommended System 12
2.3. Survey System 13
3 INSTALLATION PROCEDURES 14
3.1. Installation Parts 15
3.2. Transducer 15
3.3. Locating the DRX System 15
3.4. Mounting the DRX 16
3.5. Connecting the DRX 18
3.5.1. Power Supply
3.5.2. Connectors and Components
3.5.3. Cables and Components
3.5.3.1. Cables and Components – Front Plate
3.5.3.2. Connectors and Components – Back Plate
3.6. Display and Control Devices 23
3.6.1. DRX Setup Webpages
3.6.2. DRX Client Applications
3.7. Electrical environment check 25
4 OPERATING THE DRX 26
4.1. Power 26
4.2. LED Status 26
4.2.1. Startup sequence.
4.2.2. Normal Operation LED Indications
4.3. System Update & Diagnostics 28
4.3.1. Diagnostics Information
4.4. System Restore 29
4.5. Network Configuration 30
4.6. System Features 31
5 SENSOR CONFIGURATION 34
5.1. Commissioning Step 1: Ship Measurements 34
5.2. Commissioning Step 2: Sensor Configuration 36
5.2.1. Presets Tab
5.2.1.1. Applying Presets
5.2.1.2. Saving Custom Presets
5.2.1.3. Downloading and Uploading Presets
5.2.2. Port Setup Tab
5.2.3. Sensor Tab
5.2.4. Data Setup Tab
5.2.5. Corrections Tab
5.2.6. Key Pulse Tab
5.2.6.1. Configuring Key Pulse Slave
5.2.6.2. Configuring Key Pulse Master
5.2.6.3. Configuring Key Pulse Blanking
5.2.6.4. Advanced Key Pulse
5.2.7. PPS Tab
5.2.8. Geoids Tab
5.2.8.1. Configuring Height Relative to the DRX Geoid File
5.2.8.2. Configuring Height Relative to the Internal GPS Geoid
5.3. Commissioning Step 3: On Water Patch Tests 50
5.3.1. GPS Time Delay
5.3.2. Roll Oset
5.3.3. Pitch Oset
5.3.4. Heading Oset
5.3.5. Patch Test Validation
6 RPM PROCESSING OPTION FOR SURVEY 57
6.1. DRX Connection setup 57
6.2. Acquisition software connection Setup 57
6.2.1. RPM Setup examples
6.2.1.1. CDX
6.2.2. NavAQ (BeamworX)
6.2.3. Naviscan (Eiva)
6.2.4. Qinsy (QPS)
6.2.5. Hypack
7 CONTROL AND DISPLAY APPLICATION SUPPORT 60
7.1. Connecting the WASSP CDX to the DRX 60
7.2. Connecting Maxsea TimeZero Plot to the DRX 62
7.3. Connecting HYPACK to the DRX 64
8 OUTLINE DRAWINGS 66
8.1. DRX-32 Outline Drawings 66
8.2. DRX-46 Outline Drawings 69
9 DRX INTERCONNECTION 73
9.1. DRX-32 Interconnection 73
9.2. DRX-46 Interconnection 74
10 TECHNICAL SPECIFICATIONS 75
11 APPENDIX 76