D External connections
This appendix describes the mass spectrometer’s external connections.
Warning: To avoid skeletal or muscle injury associated with lifting heavy objects, do
not attempt to lift the mass spectrometer. To move the instrument, contact Waters
Technical Service.
Notice: To avoid damaging the mass spectrometer, observe the following precautions:
• Contact Waters Technical Service before moving the instrument.
• If you must transport the instrument, or remove it from service, contact Waters
Technical Service for recommended cleaning, flushing, and packaging procedures.
D.1 Mass detector: external wiring and vacuum connections
The instrument’s external connectors are shown below.
August 20, 2021, 715005003 Ver. 04 (Previously released as Revision C)
Page 88
To Next Page
Loading...
