Watson-Marlow 630 U - Page 106

Param
No.
EDS Values Read/Write
Default
Value
(EDS)
Parameter
Range
Comments
43 Reverse Read 0
0-1
(False/True)
If set the pump is set to
run Counter-Clockwise
44 Running Read 0
0-1
(False/True)
Set if the pump is running
45 LeakDetected Read 0
0-1
(False/True)
Set if a leak is detected
46 MotorStallError Read 0
0-1
(False/True)
If Set the pump has a
Motor Stall Error. Please
follow onscreen
instructions
47 MotorSpeedError Read 0
0-1
(False/True)
If set the pump has an
over current error. Please
follow onscreen
instructions
48 OverCurrentError Read 0
0-1
(False/True)
If set the pump has an
over current error. Please
follow onscreen
instructions
49 OverVoltageError Read 0
0-1
(False/True)
If set the set the pump has
an over voltage error.
Please follow onscreen
instructions
50 Guard/Interlock Read 0
0-1
(False/True)
If set then the guard has
been opened. Please
follow onscreen
instructions to clear.
51 FlowHi-LoActive Read 0
0-1
(False/True)
If set then the flow sensor
low warning is active
52 FlowLo-LoActive Read 0
0-1
(False/True)
If set the flow sensor low
alarm is active
53 PressureHi-LoActive Read 0
0-1
(False/True)
If set the pressure low
warning is active
106 m-630un-en-08