Watson-Marlow 630 U - Page 183

620L and 620LG flow rates
Note: Rates apply to Y elements and two channels of continuous tubing combined.
620L flow rates (2 bar pressure capacity)
620L, Neoprene, l/min 620L, Neoprene, USGPM
Speed
rpm
Tube bore (4.0mm wall)
Speed
rpm
Tube bore (4.0mm wall)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
0.1 0.002 0.003 0.005 0.1 0.0005 0.0008 0.0013
265 4.6 7.7 13.3 265 1.20 2.03 3.50
620L, Marprene, Bioprene, l/min 620L, Marprene, Bioprene, USGPM
Speed
rpm
Tube bore (4.0mm wall)
Speed
rpm
Tube bore (4.0mm wall)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
0.1 0.002 0.003 0.004 0.1 0.0004 0.0008 0.0011
265 4.5 8.0 11.3 265 1.18 2.12 2.98
620L, Pumpsil silicone, l/min 620L, Pumpsil silicone, USGPM
Speed
rpm
Tube bore (4.0mm wall)
Speed
rpm
Tube bore (4.0mm wall)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
0.1 0.002 0.003 0.004 0.1 0.0004 0.0008 0.0011
265 4.4 8.5 11.5 265 1.17 2.25 3.05
620LG flow rates (4 bar pressure capacity)
620L, STA-PURE Series PCS, STA-PURE
Series PFL, l/min
620L, STA-PURE Series PCS, STA-PURE
Series PFL, USGPM
Speed
rpm
Tube bore (4.0mm wall)
Speed
rpm
Tube bore (4.0mm wall)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
0.1 0.002 0.003 0.005 0.1 0.0005 0.0009 0.0012
165 3.1 5.7 7.8 165 0.81 1.52 2.05
265 5.2 9.0 12.4 265 1.39 2.38 3.28
m-630un-en-08 183