WAVECONTROL SMP2 - Page 66

Appendix 1. Available probes
The SMP2 has a wide range of probes that make it adaptable to every sector
and application. They include probes for the electric eld, magnetic eld,
electric and magnetic elds, low or high frequencies, high sensitivity or high
power, broadband or selective.
The probes available as of the date of this version of the Manual are:
Field Probe Field Frequency Measurement Type
WP50 E/H 10 Hz – 3 kHz Broadband
WP400 E/H 1 Hz – 400 kHz Selective & Broadband
WP400-3 E/H 1 Hz – 400 kHz Selective & Broadband
WPF3 E 100 kHz – 3 GHz Broadband
WPF6 E 100 kHz – 6 GHz Broadband
WPF8 E 100 kHz – 8 GHz Broadband
WPF18 E 300 kHz – 18 GHz Broadband
WPF40 E 1 MHz – 40 GHz Broadband
WPF60 E 1 MHz – 60 GHz Broadband
WPT E Mobile frequencies Broadband selective
WP-WIFI E Wi 2.4G Frequency Broadband selective
WPH-DC H DC – 40 kHz Selective & Broadband
WPH60 H 300 kHz – 60 MHz Broadband
WPH1000 H 30 MHz – 1000 MHz Broadband
You can always nd up-to-date technical information at:
http://www.wavecontrol.com/rfsafety/en/products/probes
User’s Manual Electromagnetic Field Meter SMP2 P. 64