Appendix 2. Applications
The SMP2 is an ideal measurement system for analysing electric and
magnetic elds in public spaces and workplaces. The wide range of probes
that can be used with the SMP2 make a unique system that can easily and
accurately measure low and high frequency elds as well as static elds.
The SMP2 can be used to take measurements in accordance with many
international exposure standards applicable to different industrial sectors. In
order to get the most out of your SMP2, it is important to choose the proper
conguration, so that it will be suitable to the characteristics of the eld to be
measured.
The table below shows some normal applications where the general public
or workers may be exposed to EMFs. For each application, the table shows
the general eld characteristics, the normal working frequency range, the
standards for the sector and the suitable combination of device and probe.
Application Type of
eld
Frequency
range
Standard SMP2 + probe
conguration
Broadcast Electric
and
magnetic
elds.
Tens to
hundreds of
MHz.
IEC 62577
EN 50420
EN 50421
EN 50475
EN 50476
EN 50496
EN 50554
IEEE Std C95.1
IEEE Std C95.3
• Broadband
measurement.
• Spatial
average.
• Probes: WPF3,
WPF6, WPF8,
WPH60 y
WPH1000
Wireless
telecommunication
networks
Electric
and
magnetic
elds.
kHz -
40/60 GHz
IEC/EN 62232
EN 50385
EN 50400
EN 50401
EN 50492
IEEE Std C95.1
IEEE Std C95.3
• Broadband
measurement.
• Spatial
average.
• Probes: WPF3
WPF6, WPF8,
WPF18,
WPF40, WPF60
y WPH1000
User’s Manual Electromagnetic Field Meter SMP2 P. 65