EasyManuals Logo

WAVECONTROL SMP2 User Manual

WAVECONTROL SMP2
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Appendix 4. Low frequency assessment
Introduction
The SMP2 + WP400 or WP400-3 eld probe combination is the most
complete and compact available on the market for evaluation of human
exposure to low frequency electromagnetic elds. It allows evaluation of
the electric eld (E) and the magnetic eld (H) using a single probe, over a
frequency range of 1 Hz to 400 kHz.
In addition, using the WPH-DC you can measure static magnetic elds (0 Hz)
and variable elds up to 40 kHz.
This document describes the different measurement options available:
• Broadband
• Selective (FFT)
• Single frequency evaluation
The choice of option will depend upon the specic application and the
objective of the measurement or evaluation.
This appendix also describes the Weighted Peak Method (WPM), which may
be used with any of those three options.
User’s Manual Electromagnetic Field Meter SMP2 P. 71

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the WAVECONTROL SMP2 and is the answer not in the manual?

WAVECONTROL SMP2 Specifications

General IconGeneral
BrandWAVECONTROL
ModelSMP2
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals