The SMP2 can sample the eld level continuously and store that data
automatically in its built-in memory at user-congured intervals with a
capacity of up to 1,000,000 samples.
The data stored in the memory can be easily downloaded to a computer via a
USB or bre optics port for later processing.
The SMP2 is also available with a built-in GPS receiver (optional) to allow each
measurement to be associated automatically with the geographic location
where it was taken.
There are three basic SMP2 models:
• Broadband: used with broadband probes.
• Selective: used with selective probes.
• Dual: used with all types of probes as it combines both features.
Appendix 1 shows information on all the available type of probes.
User’s Manual Electromagnetic Field Meter SMP2 P. 7
To Next Page
Loading...
