Wavetek 3000 - Reverse Power Protection; Auxiliary RF Output; Low Leakage; Accessories

1 .3 .2

Reverse
PowerProtection

Option "3"
preventsdamage to
the instrument
if DC (100
V max) or RF (50 W
max)voltages
are accidentally
applied to the
RF output
connector . (This
option is not
required
whenusingoption
lA or 1B) .
1 .3.3
Auxiliary RF Output

Option"4"
provides a
leveled (-10
dBm)
signal
available from a rear
panel BNC con-
nector . Normally
used to drive a
frequency
counter
.
1 .3.4 Low
Leakage
1 .4 ACCESSORIES
GENERAL INFORMATION
Option 7 reduces the leakagespecification
of Section 1 .2.2 by a factor of 10 .
Furnishedwithinstrument

Instruction Manual
Rear-panel PROGRAMMING plug and
pins
Additional Accessories

Rack Mount Kit, K108
Programmers for single push-button or GPIB
control of selectedfrequencies and output
levels, Series 3900 .
Module Service Kit, K004