Change DVCC
WHY?
Test whether the mobile switches to a different DVCC,
sends this back correctly to the base station and thus
maintains connection.
Requirement
The mobile is not in test mode.
Make the general test preparations. The channel type
must be To digital TC.
Initiate a call with
{MOBILE}
or
{CELL.}
(the mobile must be
in a digital traffic channel).
HOW?
Enter a new figure in the DVCC field. Confirm it with
[ENTER]
.
Press
{EXECUTE}
in the basic test mask. In this way
signaling adopts the new DVCC.
Test Results
D
RESULt9 DCC New digital color code. Value must be same as entered DVCC.
Fig. 10.15: Digital verification color code is
identification code for base station used, simi-
lar to SAT in analog channel. If base station
further away receives same mobile, it is distin-
guished by DVCC.
10
Handoff Procedures IS-136 MS
10-25
To Next Page
Loading...