EN
5110326C_OI-II_Webasto Live 45
Descrip-
tion
Data
Grid fre-
quency
[Hz]
50
Network
types
TN / TT (1P + N + PE or 3P + N + PE):
P to N = 230V AC; P to P = 400V AC
IT (1P + N + PE): P to N = 230V AC
Output
voltage [V
AC]
230/400 (Europe; see network
types for details)
Max.
charging
power
[kW]
11 or 22 (TN & TT network, 3-phase,
depending on version)
3.7 or 7.4 (1-phase, depending on
version – can be subject to a coun-
try-specific limitation)
EMC class Emitted interference: class B (residen-
tial, business, commercial areas)
Immunity: industrial areas
Over-
voltage
category
III as per EN 60664
Protection
class
I
Protective
devices
A residual current circuit breaker and
line circuit breaker must be provided
on the installation side. See "Criteria
for the electrical connection on page
36".
Integrated
electricity
consump-
tion meter
MID-compliant, accuracy class B in
accordance with EN50470-3 / class 1
in accordance with IEC62053-21
Descrip-
tion
Data
Fixation
type
Wall and base mounting (perman-
ently connected)
Cable
feed
Mounted on-wall or in-wall
Power
supply
conductor
cross sec-
tion
Cross section of the connection cable
(Cu) taking into account the the local
requirements: 6 or 10 mm² for 16 A
and 10 mm² for 32 A.
Connector
to vehicle
IEC 62196-1 and IEC 62196-2
Power
supply ter-
minals,
connec-
tion cable
[mm
2
]
– rigid (min.-max): 2.5 – 10
– flexible (min.-max): 2.5 – 10
– flexible (min.-max.) with wire
end ferrule: 2.5 - 10
Charging
cable type
2
up to 32 A / 400 V AC as per EN
62196-1 and EN 62196-2 length of
4.5 m / 7 m – integrated cable
bracket
Output
voltage [V
AC]
230 / 400
Max.
charging
power
[kW]
11 or 22 (depending on version)
Authentic-
ation
– RFID card reader: MIFARE DES-
Fire EV1 / MIFARE Classic (ISO
14443 A/B)
Descrip-
tion
Data
– "Plug & Charge"(ISO 15118)
Display 8 RGB-LEDS Buzzer
Network
interfaces
– LAN (RJ45) – 10/100 Base-TX
– WLAN 802.11b/g - 54 Mbit/s
Cellular Slot for micro SIM card (form factor
3FF/ micro SIM), integrated 4G mo-
dem (LTE)
Other in-
terfaces
– Modbus (RS485) – Push-in ter-
minal
– USB 2.0 Type A and B
OCPP Version 1.6
Plug &
Charge
ISO 15118-1 / ISO 15118-2
Local load
manage-
ment
up to 250 charging points, dynamic,
phase accuracy control
Solar- /
tariff-op-
timised
charging
supported
Dimen-
sions (W x
H x D)
[mm]
225 x 447 x 116
Weight
[kg]
4.4 - 6.8 (depending on version)
IP protec-
tion class,
device
IP54
To Next Page
Loading...
Need help?
General
